Driver to be used to send the anchor configuration/position of the QINSy computer on which this driver is installed to another QINSy computer. The latter can visualize the anchors of the first machine. Driver is used in conjunction with Anchor input Driver.
Both computers should be connected through their network connection; this can either be a direct cross-over cable or though a hub. The TCP/IP settings on both machines should be set up correctly.
Note: The anchor positions are transferred as Eastings/Northings on the survey datum so for correct visualization it is important that both QINSy's have the same geodetic set-up.
The driver sends status information and position of all the anchors on every update.