My Issues

Drivers Manual

QPS Trigger Device MK 1 - 17

Description

The QPS Trigger Device may be used as an output device for one or two closure(s) and/or TTL pulse(s).

Driver Information

Driver QPS Trigger Device Interface Type Serial Driver Class Type Terminated
UTC Driver (question) No Input / Output Closure Executable DrvOutFix.exe
Related Systems
Related Pages  
Table of Contents



Interfacing Notes

For more information on QPS trigger devices see the QINSy Knowledge Base - Hardware - MK 2MK 3MK 4 and MK 6. (where the MK 5 is similar to the MK 6)

Database Setup

The QPS Trigger Device may be used as an output device for one or two closure(s) and/or TTL pulse(s).
In both cases the following communication parameters should be set in the database:
Through the Controller go to Database Setup - System.
Make sure you select the appropriate Driver (MK 1 in the example). 
The Port number refers to the interface port to which the serial cable is connected (COM3 in the example).

Please Note:
The baud rate was changed since the MK 6.
Make sure the correct baud rate is selected.

MK

Baud rate

prior to the MK 6

19200

MK 6

115200