Qimera Project Layers Dock
Qimera - Project Layers
The Project Layers tab of the Source Files Panel as shown in the Project Layers Tab figure allows the user to interact with the visual layers of the Map View.
The vertical exaggeration entry controls the exaggeration of the scene along the Z axis. Qimera uses a default exaggeration of 6× to make surface features more prominent, but an exaggeration of 1× can be used for accurate scaling.
Layers Tree Nodes
All Dynamic Surfaces will appear under this node.
All static surfaces will appear under this node.
All other imported SD objects will appear under this node
The attribute panel automatically customizes itself (like magic) based on the layer(s) that you select. Above you can see all possible attributes that will be available to the user, but not all are visible at any one time. As seen in the top image, the Dynamic Surface attribute panel exposes specific attributes.
This attribute is used by Point SD layers. It allows you to change the appearance of the point. The options are Circle, Square, Crosshair, Cube, Diamond, Cylinder, Sphere, Flag, Point, and None.
This attribute is used by Point SD layers. It changes the size of the displayed marker.
This attribute is used by Dynamic Surface layers. It changes the currently displayed depth layer. The options are Average, Shallow, Deep and CUBE.
This attribute is used by Dynamic Surface layers. It changes how the surface is colored. The options are Height, Uncertainty (95% c.l.), Sounding Density, Checked Flag, Plotted Flag, Feature Flag and Suspect Flag. If the Dynamic Surface was built with CUBE, the options would also include # of Hypothesis, Uncertainty, and Hypothesis Strength.
This attribute is used by Point SD layers. It changes how the marker is colored. The options are Solid, X, Y, Z and any other imported custom attributes contained by the SD object.
This attribute is used by Dynamic Surface layers. It changes how the surface is highlighted. The options are None, Checked Flag, Plotted Flag, and Feature Flag.
This attribute is used by Dynamic and Static Surface layers. This attribute changes the surface display to either a wire frame display, a solid shaded surface, or plates mode.
This attribute is used by Dynamic and Static Surface layers. This button launches the Shading Parameters dialog.
This attribute is used by Image, Scalar, Dynamic and Static Surface layers. It controls the opacity of the layer in the Scene.
This attribute is used by most 3D layers. It applies a small vertical offset to the layer. This is mostly useful for ensuring that one layer is drawn above or below another.
This attribute is used by Image and Scalar layers. It controls the height location in the scene (Z).
This attribute is used by Static Surface layers. It drapes an Image or Scalar object onto the selected surface
Drape Onto Scene
This attribute is used by Point and Line SD layers. It drapes each vertex onto the surface layers in the scene. The point nearest (below) the vertex is where it will drape.
Mask Out Surface Areas
This attribute is used by Image layers. It allows all visible Static or Dynamic surfaces to mask out portions of the selected image.
This attribute is used by Dynamic Surface layers. It can be set to one of three update policies which control when the dynamic surface updates to changes in the underlying point data.
|Always||The dynamic surface will automatically update whenever changes are made to the underlying point data.|
The dynamic surface will automatically update whenever a processing job modifies the underlying point data.
Running any filters or manualy cleaning in the 3D editor, swath editor or slice editor will not automatically cause an update, but will instead cause the surface to marked as needing an update. This allows one to do quick manual cleaning without having to wait for the surface to update after each edit. When edits are complete, the surface can be updated via its context menu, or by pressing the Auto Process button.
The dynamic surface is completely disconnected from the changes to the underlying point data.
The 3D editor cannot be launched on the surface. Neither processing jobs, filters, or the swath editor will cause the surface to update.
Note that switching from Never to a different update policy will require a full surface update, which can be quite slow for large surfaces.
Dynamic Surface Processing State
If a Dynamic Surface Update Policy is not set to 'Always' and there are pending edits to be applied to the Dynamic Surface, the auto-solve icon will appear at the right side of the window as shown below. Edits can be applied by pressing the Auto Process button or choosing 'Update From Edits' from the right click popup menu of a Dynamic Surface.
By right clicking on any item in the Project Layer's tree hierarchy a context menu will pop up. Because many actions are available to layer types, the actions are annotated by a type number 1-6 associated with the menus listed below.
Dynamic Surface Context Menu (type 1)
Static Surface Context Menu (type 2)
Sd Object Context Menu (type 3)
Chart Context Menu (Type 4)
This action will add an SD object to the scene. If the SD object is in a different coordinate system than Qimera, it will be re-projected to the project coordinate system. If the context is for a Chart, it will add a QNC(.qnc) file to the layer. QNC files are the optimized versions of ENC(.000) files.
This action will add a custom named group to the tree hierarchy.
This action will remove the current selection from the project. Using the shortcut key 'Del' will also remove the current selection from the project.
This action will rename the current file selected within the project and from it's source location.
This action will zoom the scene such that the current object fits the viewable area of the window.
Update Dynamic Surface from Edits (1)
This action will update a selected dynamic surface with edits pending.
Select Associated Source Files (1)
This action will clear the current line selection and select all the lines in the scene associated with the currently selected Dynamic Surface.
Use Line as Selection (3)
Shown only for line objects, this action replaces the current selection, if any, with a freehand selection having the same shape as the line. If the line is not closed, an additional, closing line segment is added.
Charts On Top (no fill) (4)
This will render the ENC charts on top of any dynamic surfaces without any filled in areas (left image below). By default, charts are drawn below any Dynamic Surfaces (middle image below) and you have to change the opacity of the Dynamic Surface in order to see ENC symbology underneath the surface (right image below). Remember that charts are only draw when Qimera is in 2D View.
Create New Chart (4)
This will create a new empty ENC layer. See the section on Qimera ENC Editor Dock for more information on creating ENC objects.
Import Files (4)
This will import an ENC chart(.000) file, convert it to a QNC and save it in the project QNC folder.
Lock/Unlock Editing (4)
This allows the user to control which layers are allowed to be edited. If you have a chart layer in your Layers Dock that is not in your project as a QNC file, it will be locked by default and you will not be able to unlock it for editing. If you have an external ENC(.000) that you want to edit, import it into your project using the Import Files option above.
Return to: Qimera Interface
Return to: Dockable Windows